Very easy to install and maintain.
Solid-state construction made of high quality stainless steel has high impact resistance.
High light transmittance step tempered glass and PMMA optical lens.
BRIDGELUX/CREE/OSRAM LED chips are super bright, high intensity and low power consumption.
Extremely long service life: up to 50,000 hours.
Standard rubber cable length is 2m. Longer lengths are available.
These high power LED pond lights and fountain lights are produced to provide long-lasting underwater lighting for any underwater lighting projects. Six LEDs could be made to emit monochrome and RGB color. Each of this waterproof LED light is made of special crafted 304#SS or 316#SS with a glass lens and polished stainless steel front bezel.
Front Cover & Housing: Molding shaped 304#/316#/316L# stainless steel
LED Source: 6*1W / 2W / 1W RGB / 2W RGB / 3W RGB3in1
Lens: Optical lens, efficiency ≥85%
Glass: Tempered glass T=8mm
Cable gland: IP-68 PG-11 copper and nickel coated
Light Color: Single color/ RGB (2R 2G 2B/ RGB 3in1)
Working temperature: -20℃ to 40℃
Driver: Constant current output
Single color LED=1-circuit output
RGB 3in1 LED=3-circuit output
MCPCB: Aluminum, coefficient of heat conductivity≥2.0w/mk
Power cable: H05RN-F 2x0.75mm2 L=2m (for Single color)
H05RN-F 4x0.75mm2 L=2m (for RGB)
|Item No.||Lighting Source||Lens Beam Angle (°)||Consumption(Watt)||Input Voltage(V)||IK Rate|
|94263||6x1W RGB(2R 2G 2B)||8°/15°/25°/30°/45°/60°/90°||5.8||DC12V/DC24V||08|
|94264||6x2W RGB(2R 2G 2B)||8°/15°/25°/30°/45°/60°/90°||5.7||DC12V/DC24V||08|
|94266||6x3W RGB(RGB 3in1)||25°/30°/45°/60°||17.6||DC24V||08|
Must be installed under the water to prevent the lights from being burnt off because of the over-heating and must always be submerged when turned on to ensure proper heat dissipation.
These lights are used for any underwater lighting projects requiring bright and colorful colors, such as LED landscape lighting, submerged pond lighting, music fountain lighting, underwater LED pool lighting.