BRIDGELUX/CREE/OSRAM chips, high brightness, low energy consumption, low heat, long life.
Lens: Made of PMMA, also known as Acrylic or Plexiglas optical lens, light efficiency ≥85%.
Cable gland: IP68 waterproof rating, brass material.
The default rubber cable length is 2m, for convenient maintenance and repair.
Long life up to 50,000 hours.
Our LED underwater light 9463 series have all passed CE, RoHS certifications and have waterproof IP68 test report. 3 lamp beads with high quality LEDs. Watts and lens beam angles are optional. Lens can be symmetrical and asymmetrical. Standard low voltage for safe use underwater.
Front Cover & Housing: Molding shaped 304# or 316# stainless steel
LED Source: 3*1W/2W/1W RGB/2W RGB/3W RGB3in1
Lens: Optical lens, efficiency ≥85%
Glass: Tempered glass T= 8mm
Cable gland: IP-68 PG-11 copper and nickel coated
Light Color: Single color / RGB-DMX
Working temperature: -20℃ to 40℃
Driver: Constant current output
Single color LED=1-circuit output
RGB LED=3-circuit output
RGB 3in1 LED=3-circuit output
MCPCB: Aluminum, coefficient of heat conductivity≥2.0w/mk
Power cable: H05RN-F 2x0.75mm2 L=2m (for single color)
H05RN-F 4x0.75mm2 L=2m (for RGB)
Mounting sleeve: Plastic
|Item No.||Lighting Source||Lens Beam Angle (°)||Consumption(Watt)||Input Voltage(V)||IK Rate|
Water must be allowed to go inside and outside sleeve freely without leaking to the other side.
Must be installed under the water to prevent the lights from being burnt off because of the
LED underwater lights are widely used in fountains, pools, swimming pools, gardens, public squares, project lights, buildings, stages and many other landscapes.