CREE/BRIDGELUX/OSRAM LEDs, high efficient light source with guarantee, low power consumption.
Step tempered glass 8mm thickness, clear and heat resistant.
U shaped bracket and tripod bracket are used to fix the lamp body.
Constant current driver, no flash, fast response to reach the current, safe use.
Rated IP68 for underwater use, CE and RoHS proved.
Long life up to 50,000 hours.
This is underwater spot light has 6 SMD LEDs, the u-shaped bracket can be fixed directly on the ground or on a tripod. You could adjust the angle of the lamp body by loosing the screws on both sides.
The lamp body and bracket are both made of high quality stainless steel, body is structurally waterproof with the silicone ring seal, so that this LED underwater light is waterproof (IP68 rating) and submersible.
Front Cover & Housing: Molding shaped stainless steel 304#/316# (316L# available as special order)
Bracket: Stainless steel 304# or 316#
LED Source: 6*1W / 2W / 3W RGB3in1 / 4W RGBW 4in1
Lens: Optical lens, efficiency ≥85%
Glass: Tempered glass T=8mm
Cable gland: IP-68 PG-11 copper and nickel coated
Light Color: Single color/ RGB
Working temperature: -20℃ to 40℃
PCB: Excellent heat conductivity Aluminum, coefficient of heat conductivity≥2.0w/mk
Gasket: Molding shaped silicone seal
Power cable: H05RN-F 2x0.75mm2 L=2m (for Single color)
H05RN-F 4x0.75mm2 L=2m (for RGB)
H05RN-F 5x0.75mm2 L=2m (for RGBW)
|Item No.||Lighting Source||Lens Beam Angle (°)||Consumption(Watt)||Input Voltage(V)||IK Rate|
|95763||6x1W RGB LED||8°/15°/25°/30°/45°/60°/90°||6||DC12V/DC24V||08|
|95764||6x2W RGB LED||8°/15°/25°/30°/45°/60°/90°||12||DC12V/DC24V||08|
|95766||6x3W RGB 3in1 LED||8°/15°/25°/30°/45°/60°/90°||18.6||DC24V||08|
|95769||6x4W RGBW 4in1 LED||8°/15°/25°/30°/45°/60°/90°||24||DC24V||08|
Joy and Partner's LED underwater spot lights are bright, energy-saving, and modern design, they are widely used for fish ponds, hotel pools, water shows, park fountains, waterfalls, shopping centers, amusement parks, sea aquariums...Anywhere there is water and lighting required.
Must be installed under the water to prevent the lights from being burnt off because of the over-heating.