Stainless steel 304# or 316# housing and bracket, front cover is polished stainless steel with step tempered 7mm thickness glass.
Constant current driver, no flash, fast response to reach the current, safe use.
Rated IP68 for underwater use, CE and RoHS proved.
CREE or OSRAM LEDs, high efficient light source, low power consumption.
Reasonable and modern design. Good heat dissipation structure.
2m rubber cable is included. Longer lengths are available.
This light is a samll size underwater light with bracket, it has 1 SMD LED, watts could be 1W, 2W or 3W RGB 3in1, standard diameter 60mm (other diameters please inquire us), there are two mounting holes located in the bracket feet (for screwing down the unit).
The lamp body and bracket are both made of corrosion-resistant stainless steel, body is structurally waterproof with the silicone ring seal, so that this LED underwater light is waterproof (IP68 rating) and submersible.
Front Cover & Housing: Molding shaped 304#/316# (316L# available as special order) stainless steel
Bracket: Stainless steel 304# or 316#
LED Source: 1*1W / 2W / 3W RGB3in1
Lens: Optical lens, efficiency ≥85%
Glass: Tempered glass T=7mm
Cable gland: IP-68 PG-11 copper and nickel coated
Light Color: Single color/ RGB
Working temperature: -20℃ to 40℃
PCB: Excellent heat conductivity Aluminum, coefficient of heat conductivity≥2.0w/mk
Gasket: Molding shaped silicone seal
Power cable: H05RN-F 2x0.75mm2 L=2m (for Single color)
H05RN-F 4x0.75mm2 L=2m (for RGB)
|Item No.||Lighting Source||Lens Beam Angle (°)||Consumption(Watt)||Input Voltage(V)||IK Rate|
|95316||1x3W RGB 3in1 LED||25°/30°/45°/60°||3.3||DC12V/DC24V||07|
Joy and Partner’s underwater LED lights are bright, energy-saving, and beautifully shaped, they are widely used for ponds, swimming pools, hotel pools, water shows, aquariums, waterfalls, shopping center, fountains, landscape lighting...Anywhere there is water and lighting required.
Must be installed under the water to prevent the lights from being burnt off because of the over-heating.