Tel: +86 769 8991 9860
E-mail: sales@jp-lighting.com
Same size with the traditional PAR56, can totally match various PAR56 niches;
316L stainless steel lamp shell + Anti-UV PC cover;
IP68 structure waterproof;
Constant current driver to make sure LED light working stably, and with open & short circuit protection;
RGB synchronous control, 2wires connection, AC12V;
SMD5050 high light LED chip.
Product Information
JP-PL-18W-C-RGB LED swimming pool light AC12V LED pool light with stainless steel light body and Anti-UV PC cove, widely used in swimming pool, vinyl pool, fiberglass pool, etc.
Main Specifications
Model | JP-PL-18W-C-RGB | |||
Electrical | Voltage | AC12V | ||
Current | 2050ma | |||
HZ | 50/60HZ | |||
Wattage | 17W±10% | |||
Optical | LED chip | SMD5050 highlight LED Chip | ||
LED(PCS) | 105PCS | |||
Wave length | R:620-630nm | G:515-525nm | B:460-470nm | |
Lumen | 520LM±10% | |||
Others | Working temperature | -20~40℃ | ||
Storage temperature | -20~50℃ | |||
Warranty | 2 Years | |||
Certification | FCC,CE, RoHS,IP68 | |||
Light dimension | Φ177×102mm | |||
Inner box dimension | 185×185×118 mm | |||
N.W. / pc | 540g | |||
G.W. / pc | 740g | |||
Carton dimension | 630×410×410 mm | |||
Qty. / ctn. | 20PCS/CTN | |||
G.W. / ctn. | 16.5Kg | |||
Input terminal | 2 screw terminals, no positive and negative poles, any connection | |||
Design | 1. Select the SMD5050 LED chip, working at 80% constant current, avoid LED chips full load at overcurrent. Cause the lamp overheated and decay fast. Assure the stable working and longer lifespan.2. Product succeeded the temperature rise test and IES. | |||
Cautions | 1. Assure the power is off before installation.2. Fixtures should be installed by a qualified electrician, the wiring must comply with IEE electrical standards or national standards.3. Need to done well of waterproof and insulation before the light connect to the power lines4. This lamp can only be used underwater and must be completely immersed in water. |
Temperature Rising Test
Test report | ||
Test standard: EN 60598-1:2008+A11:2009 | ||
Test position | LED PAR56 Swimming Pool Light(Min) | |
Working temperature 28℃ | Working temperature 40℃ | |
Underwater test time(Min) | 480 | 480 |
LED edge temperature(℃) | 69 | 72 |
Product Dimension
Installation Diagram
1. Connection diagram
2.Waterproof wiring terminal
3.Please use 12V coil transformer
Light Fixture Installation
Tel: +86 769 8991 9860
Mob: +86 137 9881 0234
Fax: +86 769 8790 0780
E-mail: sales@jp-lighting.com
Skype: lance3450548
Add.: B.Building, Jinditong Industry Park, Changping Town, Dongguan City, Guangdong P.R.C. 523576